Monthly Archives: March 2016

Stitchidori DIY tutorial

Tutorial – DIY Stitchidori

It’s tutorial time! Imagine planning your life and creative endeavors all in one neat notebook. With a Midori style notebook like this Stitchidori you can. It starts out as a fabric cover with elastic straps – then you to add your own notebooks, diaries, sketchbooks etc. for instant personalisation. Visit YouTube, Pinterest and Instagram for a mountain of inspiration and tips.

The Stitchidori tutorial here can hold up to five notebooks or combination of folders, zip pouches and diaries. It can be used for keeping track of your online spending, handmade orders, children’s keepsake journals or as a diary – the possibilities are endless.

The trick is to use heavy weight Vilene on the cover and light weight Vilene on the lining. You’ll also need some round elastic which is available in most fabric stores.

Cut a pattern template 23cm x 27cm. Using this template cut

  • 1 main fabric
  • 1 heavy weight Vilene
  • 1 lining fabric
  • 1 light weight Vilene

Also cut binding

  • 100cm x 3cm (can be joined if using fat quarters)

Inner pockets

  • 1 @ 7cm x 23cm fabric and light weight Vilene
  • 1 @ 9cm x 23cm fabric and light weight Vilene

Elastic

  • 2mm elastic – 2 @ 4cm (inner elastic loops)
  • 2mm elastic – 1 @ 48cm (inner elastics to hold inserts)
  • 3mm elastic – 1 @ 27cm (outer elastic closure)
  • 20mm elastic – 1 @ 4cm (pen holder)

Stitchidori tutorial

Fuse heavy weight Vilene to main fabric OR match up sew-in Vilene to main fabric

Fuse light weight Vilene to lining and matching pocket pieces.

Double neaten one long edge of each pocket. Press with iron. Double neaten pocket edge

Sew narrow pocket to other pocket down the centre. attach small pocket to larger pocket

Stay stitch elastic pieces as shown. 6Elastic placement 5elastic loop placement

Sew the two pockets onto the lining along the outside edges. Left hand side.

With wrong sides together, sew the lining to the main piece around all 4 edges.

7Stay stitch lining to outer Inner elastic placement

Starting on the inside, along the bottom edge, sew the binding with a 6mm seam.  attach binding to inside

Stop and back tack 6mm before the corner. stop and backtack 6mm from corner

Fold the binding as show to create mitred corner.
Fold binding at right angle

Fold binding back onto intself forming the mitreBegin sewing with a back tack 6mm in from the corner and continue around remaining 3 corners. Backtack and sew 6mm in from cornerContinue remaining 3 corners.

Mark where the binding needs to join and add 12mm seam. Cut excess off. mark where the binding will joinAdd 12mm seam and trim excessJoin binding with 6mm seam

Fold the Stitchidori so you can sew the binding ends with the 6mm seam. Fold Stitchidori to sew bindingjoin binding

Finish sewing the binding.

Turn the binding to the outside and fold under twice. When you get to the corners fold as shown. Fold binding under twice to form neat edgeTurn corners to form mitre

Thread the last length of elastic through the loops and tie. Thread elastic as shown

Add your inserts and start planning! Slide the inserts under the elasticFold insert to one side and add another

 

If you want to make your own inserts, search Etsy or Pinterest for “Midori inserts” and find lots of DIY print at home versions.

You are more than welcome to make and sell Stitchidori’s using this tutorial – but only in quantities less than 20 (ie NOT mass production) and please continue calling them Stitchidori’s. Thanks and good-luck!